3D Printer Quick Start Guide

Written By: Jacob Goldman (and 4 other contributors)
  • Comments: 6
  • Favorites: 0
  • Completions: 3

Difficulty

Very easy

Steps

6

Time Required

00:02:00 - 00:30:00

Sections

1

Flags

1

Missing Images

Missing Images

This guide needs more images to properly convey the procedure being described.

Introduction

Learn 3D Printing Basics!

If you have questions, ask a facilitator.

Steps:

1) Prepare you model.

2) Setup your print.

3) Removing your print.

  1. Find and download a file from thingiverse. Click here for alternative sites. Click Download. A .ZIP file will be downloaded. Select your file from the download bar and press "Show in Folder".

    • Find and download a file from thingiverse. Click here for alternative sites.

    • Click Download. A .ZIP file will be downloaded.

    • Select your file from the download bar and press "Show in Folder".

    • Open the file and press "Extract All".

    • Find the .STL model from the Download File.

    • If you made your own thing, save as a .STL

    Edit

  2. We use Simplify3D as our slicer.
    Edit

  3. microSD Slot. Firmly press on knob to select. Rotate knob to move through options.

    • microSD Slot.

    • Firmly press on knob to select.

    • Rotate knob to move through options.

    • Home Screen

    • Main Menu

    • To go backward in the menu selection, go to the top of that menu and press the knob.

    Edit

  4. Insert microSD into Slot Press the knob to go into the Main Menu. Rotate knob and select Print from SD

    • Insert microSD into Slot

    • Press the knob to go into the Main Menu.

    • Rotate knob and select Print from SD

    • Rotate knob and select Refresh

    • Rotate know and select your file

    • If the file has a ~ in the name, the file is corrupt. Resave the file on the SD card.

    Edit

    • The filament needs to heat up before printing. This will take about 15 minutes.

    • Make sure you stick around for the first two layers and make sure there are no problems with your print.

    • If the print isn't sticking or nothing is seems to be coming out, report your problem to a Facilitator

    • If you aren't sure what you're looking for, ASK A FACILITATOR

    Edit

  6. Wait until bed is cool (less than 30ºC). Check Bed Temperature on the Home Screen

    • Wait until bed is cool (less than 30ºC).

    • Check Bed Temperature on the Home Screen

    • Unclip both clips from the front

    • Remove bed by pulling the top black sheet toward you.

    • Bend the bed and remove print.

    • If the print is still on the bed, use a scraper.

    Edit
Conclusion

This guide should conclude with a a part fully 3D Printed

3 other people completed this guide.

Author

with 4 other contributors

Jacob Goldman

Member since: 01/28/2019

3,996 Reputation

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 398